Ideal Target Skier: All Mountain Park Rider: Skiers that go anywhere on the mountain, and still make trips through the terrain park enough to require twin tips, describe these skiers. They are not afraid to skip park sessions to ski deep powder, but are torn sometimes for their love of hitting rails and jumps in the park.
Skier Ability: Intermediate to Advanced: Sometimes these skiers are intermediate, and on a good day, they are advanced, but hard to commit to one level. They can ski most places on the mountain, sometimes with a little difficulty, but always making it down without crying and calling ski patrol.
Wood Core: The standard core which has throughout time provided the best performance and durability. Each model may have it's own density level to help define flex and maximum speed but every wood core ski will be solid.
Cap Construction: The topsheet of this ski drapes over the edge to form a clean and rounded finish to the side of the ski. This style of construction adds some torsional rigidity, and helps reduce topsheet chipping when the skis hit each other.
Tip Rocker: This refers to the early rising of the tip to get the ski on top of the soft snow, rather than pushing through it. When the skis are held with the bases together, it will look like the tips are bent, and spread away from eachother. Tip rocker also helps skiers pivot the skis, making tight trees remarkably easy, and gives the ski a surf-like feel.
Tail Rocker: Just like Tip rocker, but in the tail, this feature allows the tails of the skis to release easier from the turn to give the skier the ability to turn the skis quicker in tight spots. It also allows skiers to dump speed by forcing the tails out and sliding sideways. The effective edge is reduced because of the tail rocker, so the skis will also be easier to control when forced to ski on the groomed slopes.
Twin tip skis: are where its at these days. Their versatility allows you to ski powder in the morning, bumps at midday, and session the park in the afternoon. The turned up tail is also optimal for skiing backwards (switch), but for most people, it just looks cool.
3 Choice Mount Position : The three choices are as follows. Park Mount is where the bindings are closer to dead center on the ski and is best for freeride skiers who want to ski switch a lot of the time. Manufacturer's mount is where the makers of the ski recommend you mount the bindings (usually between park and powder mount). Finally Powder mount is the furthest back on the ski which allows for more tip length and float in powder. If you wish to get more technical on where we mount your skis, please contact customer service.