|
These brake arms are designed to fit ONLY on Mojo 15-18 and Peak 15-18 bindings from the 2008-2009 season and newer. There may be a Fischer, Elan, Stockli, or some other vendor Tyrolia makes bindings for that this will work on, but as far as we know these arms are for Mojo 15-18 or Peak 15-18 only. Brake arms should always fit a ski with waist width equal to or less than the listed width of the arms. However, they usually will fit on skis 5mm wider with little difficulty (because the width at arms clearing the ski is usually wider than listed) and up to 10mm wider with slight brake arm stretching. Some shops will not like to stretch arms and some brands are easier to stretch than others. Tyrolia arms are relatively easy to stretch, Look arms are very prone to cracking. Stretching arms more than 10mm than intended is an iffy proposition.
Sometimes overlooked is that you do not want your brake arm width to be substantially wider than the width of the ski if you are an expert carver. In this case brakes sticking out can cause contact issues with the snow. MJ Series Bindings/Brakes: We are designating these MJ series bindings/brake arms. To help avoid the confusion about which brake arms work with which bindings. All MJ series parts will have this description and be accessible from the link at the beginning of this paragraph. TH 15/18 Series: We are designating these TH series bindings/brake arms. To help avoid the confusion about which brake arms work with which bindings. All TH series parts will have this description and be accessible from the link at the beginning of this paragraph. |
