Fischer RC4 110 Vacuum Ski Boots

SKU: 35215

2 Review(s) | Add Your Review | 5 Questions | International Availability
Level Nine would like to welcome the fully heat moldable Fischer Vacuum boots to our ever-growing selection of affordable, quality gear. The Fischer RC4 110 has a 110 flex with a 98mm last (that can mold up or down between 93mm-103mm), ideal for aggressive skiers looking for a close fitting boot. If you are a "ski fast, take chances" kind of guy, the RC4 110 will fit the bill for you. This boot features Fischer's proprietary "Vacuum Fit" System where the liner AND the shell can be completely molded to your foot/leg. This unique molding process makes for one of the most precise and comfortable boot fits on the market today. However, the RC4 110 can be skied right out of the box and will have an excellent fit regardless. The molding process will significantly improve the fit of the boot, but is not required by any means. Improve your skiing experience by slipping into the RC4 110 Vacuum. You can thank us later.

Availability: In stock

$279.00


Retail: $850.00 Save 67%
Ski Boot Sizing
US SIZE USA Junior/Youth USA Women AU Women USA Men AU Men Boot Sole Length mm
14.0/14.5 7 - - - - 195
15.0/15.5 8 - - - - 195
16.0/16.5 9 - - - - 210
17.0/17.5 10-11 - - - - 220
18.0/18.5 12/12.5 - - - - 230
19.0/19.5 13 - - - - 240
20.0/20.5 13.5/1 - - - - 250
21.0/21.5 2-3 - - - - 255
22.0/22.5 4/4.5 5/5.5 5/5.5 - - 265
23.0/23.5 5/5.5 6/6.5 6/6.5 - - 275
24.0/24.5 6/6.5 7/7.5 7/7.5 - - 285
25.0/25.5 7/7.5 8/8.5 8/8.5 7/7.5 6/6.5 295
26.0/26.5 - 9/9.5 9/9.5 8/8.5 7/7.5 305
27.0/27.5 - 10/10.5 10/10.5 9/9.5 8/8.5 315
28.0/28.5 - 11/11.5 11/11.5 10.0/10.5 9/9.5 325
29.0/29.5 - 12 11/11.5 11.0/11.5 10/10.5 335
30.0/30.5 - - - 12.0/12.5 11/11.5 345
31.0/31.5 - - - 13.0/13.5 12.0/12.5 355
32.0/32.5 - - - 14.0/14.5 13.0/13.5 365

This chart provides a safe comfortable size that most all skiers will be able to use. If you are looking for a true skier's performance fit you may want to size down one half to one full size smaller. For most ski boots, the full (.0) size uses the same shell and liner as the half (.5) size (like, 25.0 and 25.5) and will have almost an identical fit.

$279.00


Retail: $850.00 Save 67%

Description

Details

Secret Stash. You have found the secret stash, home to the best deals on the net, these are the best deals from a website of great deals, insane discounts on products we are trying to move out. These products won't last long so be sure to be quick on the trigger.

Vacuum Fit Not Required: This boot sports Fischer's Vacuum Fit Technology and there is the option of going through the molding process at a local Fischer dealer for a fee or we can mold the boots for free if you come to our SLC store. However, the boots can be skied right out of the box without hindering any performance or fit. Of course, the Vacuum fit is great, but if you slip the boot on and it feels good, then go ski it!

Fischer Vacuum Fit System: This proprietary heat molding system from Fischer allows skiers to get a 100% guaranteed fit by molding the shell and liner in just 20 minutes at a certified Fischer Dealer. The process uses heat, cooling pads, air pressure and a special Vacuum Fit Stand that ensures a precise fit for the entire boot.

110 Flex Rating: This boot is too stiff for beginners, and would be a very aggressive fit for intermediates. 110 flex is going to be a stiff and performance oriented shell that is recommend for advanced/expert skiers who need a very responsive boot.

93-103mm Last : Right out of the box, this boot has a 98mm last which offers an expertly performing low-volume fit. Boots of this last width can run the gamut from very tight fitting to reasonably comfortable, but they will all fit much much tighter than a rental or intermediate boot. Through the Vacuum Fit Process, the shell can mold between 93-103mm depending on your foot width. This mold-ability opens this boot up a much wider range of foot widths than ever before.

Find a Vacuum Fit Dealer: Follow to locate the closest Fischer Vacuum Fit dealer that will be able to mold your boots you purchased from L9.

Seamless Slider: Smooth material on the inside back of the liner to help the foot slide in and out of the boot with less effort.

Tongue Pull: A loop of fabric at the top of the tongue helps in putting on and removing the boots. Pull it forward and to the side and your foot should slide right in.

Full Thermo Fit Liner: Body heat activates the material in this liner to shape to the skier's foot faster than a standard liner. The insulation also has heat reflective properties to keep the warm in, and the cold out.

Micro-adjustable aluminum buckles: These aluminum buckles can be moved to adjust for size, so if the default position of the buckle and the teeth is too wide or too narrow, you can move it until it fits.

Adjustable rear spoiler: With the turn of an allen key, the height at the top rear of the boot can be adjusted. If you are taller than average for your boot size, or if you just want the extra support at the back of the leg, you can adjust the spoiler up about 1cm from standard. This will also pitch you forward slightly into a more aggressive stance.

Double Canting: Two adjustment bolts, one each side of the ankle, allow for maximum adjustment for leg/knee alignment problems. The canting helps the skis stay flat on the ground while you are still bow-legged or knock-kneed.

Replaceable Toe and Heel Pads: This is a must-have for skiers that don't live in ski in/ski out condos. When your ski tech tells you that you have to buy new boots because the soles are worn down too much, just laugh at him and tell him to order you a new set of sole plates.

45mm Strap: Super wide strap found on high performance boots. The extra width spreads out the force while skiing and reduces the pressure point on the upper shin.

SOMA-Tec: The positioning of the feet in a SOMA boot is in a natural 'V' shape, with the toes pointed slightly outward, and the heels slightly inward. This positioning puts the skier's center of gravity over the middle of the ski for better control and edging power. This design also creates less stress on the knee and ankle joints.

Full Custom Thermo Toebox: The elastic toebox in special neoprene and lycra offers better warmth insulation and ideal fitting for the individual forefoot width.

Ultralon Heel/Ankle Padding: Perfect heel fit and direct power transfer through the thermo-adjustment of the ankle padding. This material is ideal for the Vacuum Fit process and ensures a comfortable, snug fit in the heel of the boot.

Additional Info

Ability Level Advanced, Expert
Gender Men's
Model Year 2014
Forefoot Width 98mm
International Availability-Prices USD United States, Canada, Australia/New Zealand/Chile/Argentina, UK, Ireland, Japan
Bindings Boot Compatible Adult
Flex 110
SKU 35215
Country of Manufacturer Italy
Warranty Manufacturers one year standard warranty

Product Questions


Product Questions

I have off knees 3 degrees and 2 degrees. The base plate of my Lange boots could only be adjusted 2 degrees maximum. Can the base of these boots be accommodate the adjustments I need? If not what do you suggest?
18
What model year are these boots? I have heard that the shell plastic has been improved in recent years. Thanks. Jerry
7
Hello level nine,

I'm interested in these boots. I wonder whats the deference between this model and the model one year later (black/white). Because of the difference of 100 dollar. I've heard that the inner shoe is narrower at the front in the older models. Or is it just the color?

Thanks.

Greetings michiel
-2
Hi Guys, want some boots for my son - are the Fischer generally a broad fit or narrow? Cheers Rob
-6
Hello, I have a question regarding sizing with the Fischer Vacuum Fit boots, because I am more so a size 29 if I can find it but sometimes 28.5 is a little small and some 29.5 can be a hair too big and I was wondering if the molding process for the Vacuum fit can also fix slight sizing issues such as a 28.5 being a little tight or 29.5 being a hair big? Thanks, RBS
-13

Reviews

Amazing fit.. but coldReview by bdp
Rating
I got these from L9 and just had them vacuumed fit at my local shop. They are the best fitting boots I've used. I like a really tight fit and out of the box they fit great but had a few tight spots. The heat molding process was able to expand just the areas I needed and then to reduce volume in all the other spots to provide a very snug and comfortable fit.
The shell plastic requires at least 24 hours to cure after molding, some say 12 but you dont want to damage the shell taking them out too early.
Only real downside is on cold days my feet can feel the cold and I never get cold feet. This is a common critique of these vacuum boots. I might just try to install heaters because the fit is to amazing to pass up.
(Posted on 3/11/2017)
Skiied my new RC4 110 boots twice before taking to Level9 for heat and vacuum. Sarah, John, Max, Julie and Cole were instrumental in fitting the boots properly. As my right foot is 1/2 size bigger than the left correct sizing was critical. The 110's skiieReview by seadog
Rating
Level 9 team has put me into a great set of boots using technical expertise and in a timely fashion.. (Posted on 1/5/2017)

Write Your Own Review

You're reviewing: Fischer RC4 110 Vacuum Ski Boots

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating

You may also be interested in the following product(s)

Level Nine Sports Aluminum Ski Poles 2017

Level Nine Sports Aluminum Ski Poles 2017

$19.00


Retail: $59.00 Save 68%
48 Review(s)
Bern G2 Zip Mold Helmet

Bern G2 Zip Mold Helmet

$59.00


Retail: $139.99 Save 58%
16 Review(s)
Fischer Ranger 106 Ti Skis

Fischer Ranger 106 Ti Skis

$299.00


Retail: $850.00 Save 65%
4 Review(s)